Sunny Tripower X 13-US (208V) / 20-US / 25-US / 30-US

The following accessories are available for the Sunny Tripower X:

• DC overvoltage protection type 1+2 and type 2: SMA order number DC_SPD_KIT7_T1T2

• DC overvoltage protection type 2: SMA order number DC_SPD_KIT6-10

• DC terminal cover: SMA order number DC-TERM-COVER

• SMA Sensor Module-US: SMA order number MD.SEN-US-40

• AC Disconnect Kit: SMA order number 210841-00.01

• Roof Mount Kit: SMA order number 210462-00.01

Further information on accessories can be found on the Sunny Tripower X product page under “Downloads,” either in the accessory manuals or in the Sunny Tripower X operating manual.

The standard warranty for the Sunny Tripower X is 10 years.

Yes, you can extend the warranty to 10, 15 and 20 years. To do so, submit a request to SMA: https://my.sma-service.com/s/osc-30-warranty-extension

Yes, the SMA Sensor Module is available as an accessory for the Sunny Tripower X. The following restrictions on use apply:

• The MD.SEN-US-40 is compatible with the Sunny Tripower X starting from hardware version A2. The hardware version can be found on the packaging label of the SMA Sensor Module.

• If the SMA Sensor Module is used in the Sunny Tripower X, you may only connect signal sources (e.g., irradiation sensors) with current signals to the analog input of the SMA Sensor Module.

• The S0 interface of the SMA Sensor Module cannot be used for the Sunny Tripower X. It is therefore not possible to operate an anemometer or energy meter with the Sunny Tripower X by connecting them to the S0 interface of the SMA Sensor Module.

In connection with an energy meter, an SMA System Manager takes over closed-loop control at the point of interconnection and can control or regulate subordinate inverters. The System Manager also takes over system monitoring and communication to the Sunny Portal powered by ennexOS.

The SMA Data Manager and certain SMA inverters can be configured as a System Manager.